Research Inc.

ChamberIR

Research manufactures a full line of heating systems for heating on a variety of substrates, including porous surfaces like corrugated cartons, paper or wood, or non-porous surfaces like plastics, stretch wraps, metals, glass and more.
Research's IR heating systems are engineered inside and out for industrial strength operation. Heavy duty gauge coated steel cabinetry ensures continuous operation in harsh, real world environments.

To determine the correct IR heating system for your application, review the products listed below, call (952)949-9009, or e-mail us today to have a Research representative suggest the correct system for your operation.

Model 4069- Focuses heat radially inward to provide high density IR heating for wire, cable, tube, and profiles.

Model E4- The Model E4 elliptical chamber is designed for rapid heating of small size continuous materials such as tube, cable, and wire with an outer diameter less than 0.25 inch (6 mm). It may also be used as high temperature furnace in test applications. The E4 is available in seven different lengths. Typical applications for these heaters include:

Model ExtrudeIR 4069E- The Model 4069E ExtrudeIR curing system uses high intensity infrared lamps and polished aluminum reflectors to deliver heat precisely where it is needed for many curing and drying applications on extrusion lines. It can be used effectively to provide a surface cure to rubber extrusions, dry adhesives and coatings on rubber or metal, and provide in process curing between layers of multi layer cable. Depending on the model selected, diameters as small as 1/4 inch or a large as 4 inches can be processed.

Model ProfileIR 4069P- The Model 4069 ProfileIR® curing system uses high intensity infrared lamps and polished aluminum reflectors to deliver heat precisely where it is needed to cure irregularly shaped profiles. It can instantaneously give a surface cure that eliminates marks that occur when uncured rubber rubs on a conveyor. Depending on the model selected, diameters as small as 1/4 inch or as large as 4 inches can be cured. The lamps in the heater are controlled in six zones so more heat can be directed at the sections of the profile with the most mass and less heat toward the rest.



	Home \| Products \| Applications \| News \| Infared Basics \| Trade Shows About Us \| Careers \| Contact Us \| Internal Email \| Sales Reps \| Technical Support Service
	Copyright © 2007 Research, Inc. All rights reserved. Graphics, logos, images and brands are trademarks and copyrights of their respective owners. Providing infrared heating and drying solutions since 1952.
	Phone: (952)949-9009